QM INDUSTRIES QAAMH18A090SM Mounted Units & Inserts

B:32.5 mm; C:43.55 kN; H1:23.2 mm; S:12 mm; Designation of bearing:ES211-35G2; H:61.3 mm; C0:29.2 kN; T min.:-20 °C; T max.:100 °C; A:60 mm;

Basic Load Rating, Static Rating(N):61900; Grease Type:SH44M; Surface Treatment:No; RoHS:6; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Rolling Element Material:Bearing Steel; Basic Load Rating, Dynamic Rating(N):84000; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7;

Brand:NTN; Dynamic load, C:10.1 kN; Minimum Buy Quantity:N/A; Internal Special Features:No; Enclosure:2 Seals; B:12 mm; Characteristic rolling element frequency, BSF:5.49 Hz; Characteristic cage frequency, FTF:0.41 Hz; Maximum Capacity / Filling Slot:No; Outside Diameter:1.85 Inch | 47 Milli;

Flange Shape:Compact Type; Holder Surface Treatment:Black Oxide Coating; Width T(mm):20 ～ 40; Shape:Flange Type; Bearing Part Number:625; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Days to Ship:7 Days; Flange O.D. H(φ):38; Seals:ZZ (Double Shield);

Designation of housing:FC212-; C0:32.8 kN; s1:32.55 mm; A:48 mm; Recommended tightening torque for set screw:16.8 Nm; B:65.1 mm; S:25.4 mm; Designation of bearing:UC212-39G2T04; T min.:-40 °C; G:M6x1;

rs min:1.5 mm; Characteristic rolling element frequency, BSF:5.76 Hz; d:75 mm; Brand:NTN; Dynamic load, C:66 kN; Characteristic inner ring frequency, BPFI:6.43 Hz; D:130 mm; Da max:122 mm; Fatigue limit load, Cu:2.21 kN; Characteristic outer ring frequency, BPF0:4.57 Hz;

G:M6x1; Designation of housing:PH205-; H:80 mm; L1:50 mm; B:34 mm; A:50 mm; J:105 mm; A1:24 mm; L:140 mm; T min.:-20 °C;

Raceway Ring Shape:Cylindrical Roller; B:34; Precision (JIS):Grade 0; Raceway Ring Shape:Cylindrical Roller; Inner/Outer Ring Material:Steel; D:180; Revolution Frequency(rpm):3800; Cylinder shape (suffix symbol: X):No; Large-capacity type:Standard; Combination of two pieces:Standard;

Size Standards:Metric System; Rubugado Symbol:No; Symbol of Bearing Ring Shape:No; Max. Allowed rpm(rpm):24000; I.D.(Ø):9; Material Symbol:No; Spacer, Sleeve symbol:H; Type:Ball; Internal Symbol:No; Bearing Style:Double Shielded;

d:40 mm; Contact angle α:40 °; Nref:9,000 rpm; Characteristic cage frequency, FTF:0.42 Hz; Characteristic rolling element frequency, BSF:4.92 Hz; d2:45.6 mm; ra max:1 mm; Characteristic inner ring frequency, BPFI:8.06 Hz; Nlim:9,800 rpm; a:34 mm;

d:55 mm; Designation of housing:PLE211N-; H2:128 mm; T max.:100 °C; s1:48.4 mm; G:M6x1; L:219.5 mm; S:27.7 mm; B:55.4 mm; A1:39.5 mm;

Holder Surface Treatment:Clear Anodize; Days to Ship:7 Days; Width T(mm):15; Bearing I.D. d(mm):12; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Volume Discount:Available; Flange O.D. H(φ):56; Volume Discount:Available;

DUR/DOR F/E:270.000 mm; Static Load Rating Co:1924 kN; O.D. D:330.000 mm; Dynamic Load Rating C11:4320 kN; Width B:220.000 mm; Lubrication Hole Diameter h:4.5 mm; Lubrication Groove g:9.6 mm; Backing Housing Diameter Ds:306.0 mm; Chamfer r1smin2:2.1 mm; Bore d:240 mm;

Bearing Retained:No; Cover Type Selection:S (for Oil Seal); Flange Shape:Round Type; Bearing I.D. d(mm):40; Bearing Used:Angular Contact Bear; Flange Shape:Round Type; RoHS:6; Housing Material:1045 Carbon Steel; Volume Discount:Available; Number of Bearings:Double;

Recommended tightening torque for set screw:8 Nm; H:102 mm; A:37 mm; H2:64 mm; N:22mm; S:8.5 mm; A5:23.5 mm; L2:13 mm; s1:16 mm; L:129 mm;